I got a lot of question on one of my blogs wanting to know how to clean UGG boots. So, I wanted to put together a small tutorial for help. In order to complete this guide you will need a UGGs cleaning kit, a sponge, a cloth and some water.
Sheepskin care kit from Ugg Australia. This care kit includes everything you need to clean and protect your UGG twin-faced sheepskin boots and slippers. This kit includes UGG Cleaner & Conditioner, UGG Water & Stain Repellent, a freshener, a brush, and a stone to revive the natural luster of your twin-faced sheepskin boots. This care kit is recommended for use only on twin-faced sheepskin boots and slippers within the Classic, Ultra and Ultimate collections.
Below are the step by step instructions that you will need to follow to clean your UGG boots.
1. Take the cloth from the kit and get the water that was needed from the first paragraph. You want to lightly dampen the cloth, DO NOT submerge the boots in the water. The water needs to be cold.
Now it is time to mix the cleaner. The cleaner is to strong by itself. It needs to be diluted in a cup one part cleaner and one part water.
Next, it is time to start cleaning the boot. Be very careful during this procedure. Apply the diluted cleaner to a sponge and gently rub the cleaner into the boot. Don't run too hard as you may damage the nap.
4. Rinse the sponge out to remove the solution. Make sure all the solution is gone by rinsing a couple of times. Now, use the sponge to rinse off the solution from the boot.
5. Stuff paper or something in your boots to keep the shape while you wait for the boots to dry. Let the boots sit out in direct sunlight or direct heat as they dry.
This is the final step. You need the stone from the kit and a brush. Brush the boot to restore the nap.
To complete the cleaning you may want to get something to make the inside smell and look just as nice as the outside. I recommend something real quick and easy to get, a can of febreeze. Just spray this on the inner sheepskin part, it keeps the inside smelling nice and fresh. I hope this helps.. - 15634
Sheepskin care kit from Ugg Australia. This care kit includes everything you need to clean and protect your UGG twin-faced sheepskin boots and slippers. This kit includes UGG Cleaner & Conditioner, UGG Water & Stain Repellent, a freshener, a brush, and a stone to revive the natural luster of your twin-faced sheepskin boots. This care kit is recommended for use only on twin-faced sheepskin boots and slippers within the Classic, Ultra and Ultimate collections.
Below are the step by step instructions that you will need to follow to clean your UGG boots.
1. Take the cloth from the kit and get the water that was needed from the first paragraph. You want to lightly dampen the cloth, DO NOT submerge the boots in the water. The water needs to be cold.
Now it is time to mix the cleaner. The cleaner is to strong by itself. It needs to be diluted in a cup one part cleaner and one part water.
Next, it is time to start cleaning the boot. Be very careful during this procedure. Apply the diluted cleaner to a sponge and gently rub the cleaner into the boot. Don't run too hard as you may damage the nap.
4. Rinse the sponge out to remove the solution. Make sure all the solution is gone by rinsing a couple of times. Now, use the sponge to rinse off the solution from the boot.
5. Stuff paper or something in your boots to keep the shape while you wait for the boots to dry. Let the boots sit out in direct sunlight or direct heat as they dry.
This is the final step. You need the stone from the kit and a brush. Brush the boot to restore the nap.
To complete the cleaning you may want to get something to make the inside smell and look just as nice as the outside. I recommend something real quick and easy to get, a can of febreeze. Just spray this on the inner sheepskin part, it keeps the inside smelling nice and fresh. I hope this helps.. - 15634
